Ritter’s method in brief: Ritter’s method, also known as the method of sections, is used to determine axial forces in selected truss members without having to analyze the entire structure. The section cut through the truss must divide it into two independent parts and...
Method of joints in trusses in brief: The method of joints consists of isolating individual truss joints and analyzing them as particles in static equilibrium. The analysis should begin at a joint where no more than two members have unknown axial forces. For each...
Internal forces in beam in brief The calculation process starts by determining the support reactions using the three equations of static equilibrium. The beam should be divided into characteristic spans, whose boundaries are defined by the locations of point loads,...
In brief Internal forces are the material’s response to external loads, ensuring the structure remains continuous and in equilibrium. In beams and frames, three basic internal actions are distinguished: the axial force (N), the shear force (V), and the bending moment...
Internal force analysis in brief Internal-force analysis can be carried out from the left or from the right side of the beam, and the results at a given point must be identical regardless of the chosen direction. Axial forces are taken as positive when their direction...
online application for analytical calculations of engineering structures
The solution is not just the result. EquiStruct will guide you smoothly through the calculations of cross-sections and beams. The report will show you the process step by step.
You will receive correct results and understand the calculation methods. EquiStruct is the solution to your problems with mechanics.